Tag Archives: direct driven air compressor

China Best Sales Direct Driven Electric Motor 20HP 15kw Rotary Screw Air Compressors best air compressor

Product Description

Integrated air tank air dryer screw air compressor
Belt driven type Screw Air Compressor Specifications
* Genuine belt to meet the demand of heavy-duty, long life and high reliability.
* Convenient belt tensioning device makes the maintenance easy,and the transmisstion high-efficiency is ensured.
* Provide the flexibility for the customers easily modify the working pressure if a change becomes necessary.
* Low operation cost
* Energy saving

KP-LB Belt Drive Integrated Type Screw Air Compressor with air tank air dryer
Power range: 20hp ~ 600hp
Pressure: 7-13 Bar
* 7bar/8bar/10bar/12.5bar working pressure(discharge pressure) for your selection (for more lower pressure 4bar or 6bar, please send your inquiry )
* Intelligent microcomputer control system, controller has the remind & record function, show the compressor operation situation clearly
* Superior components, low maintenance cost
* Germany OPTI belt, easy for replace, and ensure the product quality
* Oversize air-end, low rpm, no overheat problem
* IP54/IP55 high quality motor, SK F bearing, Class F level insulation; Class BTemperature rise;
* Discharge temperature= Ambient temperature+15ºC, with cooling/ventilation system tailor made to the same local hot-humid climatic condition, NO OVERHEATING ON CONTINUOUS 100% LOAD IS GUARANTEED!
* Top door is locking design, easy to open to clean the cooler and fan
*Compressor is filled with lubrication oil before delivering, you can operate it after installed and powered on. Once it run 500hours to change the new air filter and oil filter was set for first maintenance, then normally change them with 2000-3000hours for once maintenance replacing new one.
* Phase reversal protection, current overload protection, pressure protection, overheat protection

Model No.	Motor Power (kw)	Power(Hp)	Air delivery(m³/mim)	Working pressure(bar)	Lubricant Oil (L)	Outlet Pipe Dia	LWH(mm)	N.W(KG)
KP-LD-22	22	30	3.5	7	15	G1″	1300×850×1220	550
			3.3	8
			3	10
			2.6	13
KP-LD-30	30	40	5.2	7	20	G1-1/2″	1550×950×1380	700
			5.0	8
			4.5	10
			3.8	13
KP-LD-37	37	50	6.5	7	20	G1-1/2″	1550×950×1380	800
			6.2	8
			5.7	10
			4.8	13
KP-LD-45	45	60	8.0	7	20	G1-1/2″	1550×950×1380	960
			7.5	8
			6.9	10
			6.0	13
KP-LD-55	55	75	10.3	7	30	G2″	1700×1100×1520	1600
			9.6	8
			8.7	10
			7.5	13
KP-LD-75	75	100	13.5	7	35	G2″	2100×1200×1650	1900
			12.5	8
			11.2	10
			10.0	13
KP-LD-90	90	125	16.3	7	40	DN50	2200×1250×1650	2100
			15.9	8
			14.0	10
			12.2	13
KP-LD-110	110	150	21.0	7	50	DN65	2500×1500×1950	3400
			20.0	8
			17.0	10
			14.8	13
KP-LD-132	132	180	23.5	7	50	DN65	2500×1500×1950	3400
			22.5	8
			21.0	10
			18.0	13
KP-LD-160	160	220	28.0	7	60	DN80	2600×1500×1950	4000
			26.5	8
			24.5	10
			20.3	13
KP-LD-185	185	250	32.0	7	60	DN80	2800×1560×1920	4000
			30.0	8
			27.8	10
			24.5	13
KP-LD-200	200	280	34.3	7	60	DN80	2800×1700×1950	4200
			32.9	8
			30.2	10
			27.2	13
KP-LD-220	220	300	36.0	7	100	DN100	3360×2000×2000	4500
			34.2	8
			30.2	10
			27.5	13
KP-LD-250	250	340	43.5	7	100	DN100	3360×2000×2000	4900
			41.8	8
			38.0	10
			34.5	13
KP-LD-315	315	400	57.6	7	220	DN125	4200×2250×2275	5700
			54.5	8
			50	10
			43.4	13
KPLD-355	355	480	64.5	7	220	DN125	4200×2250×2275	6200
			62.2	8
			56.0	10
			48.6	13

*According to the standard of GB19153-2009 *Compressor Stage: CHINAMFG Compression
*Standard Power Supply: 380V/50Hz/3ph *Exhaust Temperature: Ambient Temperature +15ºC
*Configurated normal temperature type Air dryer,with Dew Point range: 3-10ºC;
*Please contact us for any specification that is not within the above mentioned standard.

Welcome to join us !
We Consider Our Customers as Our Friends and Families, and We do Believe in the CHINAMFG Situation for Building up Long-Term Relationship.
• Innovation
    Provide innovative, stable products and services.
• Quality
    Deliver consistently superior performance and pursue every possible improvement.
• Agility
    Identify emerging trends and act quickly to acquire new opportunities.
• Customer Satisfaction
    Anticipate customer needs and exceed their expectations.
• Warranty
Within 12 months since the customer used,or 18 months since shipped from factory, no matter which expires, we ensure that no defects for material and manufacturing.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Horizontal
Structure Type:	Closed Type
Installation Type:	Stationary Type

Samples:	US$ 3500/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

air compressor

What are the energy-saving technologies available for air compressors?

There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

1. Variable Speed Drive (VSD) Compressors:

VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

2. Energy-Efficient Motors:

The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

3. Heat Recovery Systems:

Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

4. Air Receiver Tanks:

Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

5. System Control and Automation:

Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

6. Leak Detection and Repair:

Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

7. System Optimization and Maintenance:

Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

air compressor

How are air compressors employed in the mining industry?

Air compressors play a crucial role in the mining industry, providing reliable and efficient power for various mining operations. Here are some common applications of air compressors in mining:

1. Exploration and Drilling:

Air compressors are used during exploration and drilling activities in the mining industry. Compressed air is used to power drilling rigs, pneumatic hammers, and other drilling equipment. The high-pressure air generated by the compressor helps in drilling boreholes, extracting core samples, and exploring potential mineral deposits.

2. Ventilation and Air Quality Control:

Air compressors are employed in underground mining to provide ventilation and control air quality. Compressed air is used to operate ventilation fans and air circulation systems, ensuring adequate airflow and removing harmful gases, dust, and fumes from the mining tunnels and work areas.

3. Material Conveyance:

In mining operations, air compressors are used for material conveyance. Pneumatic systems powered by air compressors are utilized to transport materials such as coal, ore, and other minerals. Compressed air is used to operate pneumatic conveyors, pumps, and material handling equipment, allowing for efficient and controlled movement of bulk materials.

4. Dust Suppression:

Air compressors are employed for dust suppression in mining areas. Compressed air is used to spray water or other suppressants to control dust generated during mining activities. This helps in maintaining a safe and healthy work environment, reducing the risks associated with dust inhalation and improving visibility.

5. Instrumentation and Control:

Air compressors are used for instrumentation and control purposes in mining operations. Compressed air is utilized to power pneumatic control systems, control valves, and actuators. These systems regulate the flow of fluids, control equipment movements, and ensure the proper functioning of various mining processes.

6. Explosive Applications:

In mining, air compressors are used for explosive applications. Compressed air is employed to power pneumatic tools used for rock fragmentation, such as rock drills and pneumatic breakers. The controlled power of compressed air enables safe and efficient rock breaking without the need for traditional explosives.

7. Maintenance and Repair:

Air compressors are essential for maintenance and repair activities in the mining industry. Compressed air is used for cleaning machinery, removing debris, and powering pneumatic tools for equipment maintenance and repair tasks. The versatility and portability of air compressors make them valuable assets in maintaining mining equipment.

It is important to note that different mining operations may have specific requirements and considerations when selecting and using air compressors. The size, capacity, and features of air compressors can vary based on the specific mining application and environmental conditions.

By utilizing air compressors effectively, the mining industry can benefit from increased productivity, improved safety, and efficient operation of various mining processes.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

1. Air Demand: Determine the air demand requirements of your applications. Calculate the total CFM (Cubic Feet per Minute) needed by considering the air consumption of all the pneumatic tools and equipment that will be operated simultaneously. Choose an air compressor with a CFM rating that meets or exceeds this total demand.

2. Pressure Requirements: Consider the required operating pressure for your applications. Check the PSI (Pounds per Square Inch) rating of the tools and equipment you will be using. Ensure that the air compressor you choose can deliver the necessary pressure consistently.

3. Duty Cycle: Evaluate the duty cycle of the air compressor. The duty cycle represents the percentage of time the compressor can operate within a given time period without overheating or experiencing performance issues. If you require continuous or heavy-duty operation, choose a compressor with a higher duty cycle.

4. Power Source: Determine the available power source at your location. Air compressors can be powered by electricity or gasoline engines. Ensure that the chosen compressor matches the available power supply and consider factors such as voltage, phase, and fuel requirements.

5. Portability: Assess the portability requirements of your applications. If you need to move the air compressor frequently or use it in different locations, consider a portable or wheeled compressor that is easy to transport.

6. Space and Noise Constraints: Consider the available space for installation and the noise restrictions in your working environment. Choose an air compressor that fits within the allocated space and meets any noise regulations or requirements.

7. Future Expansion: Anticipate any potential future expansions or increases in air demand. If you expect your air demand to grow over time, it may be wise to choose a slightly larger compressor to accommodate future needs and avoid the need for premature replacement.

8. Budget: Consider your budgetary constraints. Compare the prices of different air compressor models while ensuring that the chosen compressor meets your specific requirements. Keep in mind that investing in a higher-quality compressor may result in better performance, durability, and long-term cost savings.

By considering these factors and evaluating your specific needs, you can choose the right size of air compressor that will meet your air demand, pressure requirements, and operational preferences, ultimately ensuring efficient and reliable performance.

China Best Sales Direct Driven Electric Motor 20HP 15kw Rotary Screw Air Compressors best air compressor
editor by CX 2024-02-12

China best 50L 1.5kw Piston Compressors Oil Free Direct Driven Air Compressor lowes air compressor

Product Description

50L 1.5kw Piston Compressors Oil Free Direct Driven Air Compressor

Product Parameters

Name	Direct driven Air Compressor
Applicable Industries	Manufacturing Plant, Food & Beverage Factory, Printing Shops, Construction works , Food & Beverage Shops, Advertising Company
Showroom Location	None
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Marketing Type	Other
Core Components	Pressure vessel, Engine, Motor, Pump, Bearing
Gas Type	Air
Configuration	PORTABLE
Power Source	AC POWER
Type	PISTON
Lubrication Style	Oil Free
Mute	Yes
Voltage	220V
Dimension(LWH)	723274
OEM	Welcomed

Model name

Delivery rate at 0 bar

Max. pressure

Tank

Pump

Motor input

Voltage

Speed

XLFL-50L

210L/min

8 bar 115psi

50L

1048

1.8 KW

220 V

2800RPM

Product Display

Company Profile

Founded in 2002, ZHangZhoug CHINAMFG Electromechanical Co., Ltd. focus on manufacturing air compressors for more than 15 years.
Our company is located in Daxi Pump Industrial Area, HangZhou City, ZHangZhoug, China. having more than 15000 square meter working area. We specialize in all kinds of piston air compressors, especially having advantages in our new advanced heavy-duty oil-free
air compressors.

FAQ

Q1: Are you a factory or a trading company?
A: A: Manufacturer and we focus on the development and production of air compressors for more than 20 years.

Q2: Is OEM service available?
A: Of course. We have many years experience of OEM service.

Q3: Can I get a sample to check the quality?
A: We are glad to offer you samples for test. Leave us message of the item you want or your requirements. We will reply you within 24 hours in working time.

Q4: I am buying from another supplier, but need better service, would you match or beat the price I am paying?
A: We always feel we provide the best service and competitive prices. We would be more than happy to personalize a competitive quote for you, just email us.

Q5: Is customized service available?
A: Of course, OEM & ODM both are available. Please contact us for details.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	1 Year
Lubrication Style:	Oil-free
Cooling System:	Air Cooling
Cylinder Arrangement:	Duplex Arrangement
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What is the impact of humidity on compressed air quality?

Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:

1. Corrosion:

High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.

2. Contaminant Carryover:

Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.

3. Decreased Efficiency of Pneumatic Systems:

Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.

4. Product Contamination:

In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.

5. Increased Maintenance Requirements:

Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.

6. Adverse Effects on Instrumentation:

Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.

To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.

air compressor

How do you troubleshoot common air compressor problems?

Troubleshooting common air compressor problems can help identify and resolve issues that may affect the performance and functionality of the compressor. Here are some steps to troubleshoot common air compressor problems:

1. No Power:

Check the power source and ensure the compressor is properly plugged in.
Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

Ensure the compressor’s cooling system is clean and unobstructed.
Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
Verify that the compressor is not being operated in an excessively hot environment.
Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
Consider using a thermal overload protector to prevent the motor from overheating.

If troubleshooting these common problems does not resolve the issue, it may be necessary to consult the manufacturer’s manual or seek assistance from a qualified technician. Regular maintenance, such as cleaning, lubrication, and inspection, can also help prevent common problems and ensure the optimal performance of the air compressor.

air compressor

Can you explain the basics of air compressor terminology?

Understanding the basic terminology related to air compressors can help in better comprehension of their operation and discussions related to them. Here are some essential terms related to air compressors:

1. CFM (Cubic Feet per Minute): CFM is a unit of measurement that denotes the volumetric flow rate of compressed air. It indicates the amount of air a compressor can deliver within a minute and is a crucial factor in determining the compressor’s capacity.

2. PSI (Pounds per Square Inch): PSI is a unit of measurement used to quantify pressure. It represents the force exerted by the compressed air on a specific area. PSI is a vital specification for understanding the pressure capabilities of an air compressor and determining its suitability for various applications.

3. Duty Cycle: Duty cycle refers to the percentage of time an air compressor can operate in a given time period. It indicates the compressor’s ability to handle continuous operation without overheating or experiencing performance issues. For instance, a compressor with a 50% duty cycle can run for half the time in a given hour or cycle.

4. Horsepower (HP): Horsepower is a unit used to measure the power output of a compressor motor. It indicates the motor’s capacity to drive the compressor pump and is often used as a reference for comparing different compressor models.

5. Receiver Tank: The receiver tank, also known as an air tank, is a storage vessel that holds the compressed air delivered by the compressor. It helps in stabilizing pressure fluctuations, allowing for a more consistent supply of compressed air during peak demand periods.

6. Single-Stage vs. Two-Stage: These terms refer to the number of compression stages in a reciprocating air compressor. In a single-stage compressor, air is compressed in a single stroke of the piston, while in a two-stage compressor, it undergoes initial compression in one stage and further compression in a second stage, resulting in higher pressures.

7. Oil-Free vs. Oil-Lubricated: These terms describe the lubrication method used in air compressors. Oil-free compressors have internal components that do not require oil lubrication, making them suitable for applications where oil contamination is a concern. Oil-lubricated compressors use oil for lubrication, enhancing durability and performance but requiring regular oil changes and maintenance.

8. Pressure Switch: A pressure switch is an electrical component that automatically starts and stops the compressor motor based on the pre-set pressure levels. It helps maintain the desired pressure range in the receiver tank and protects the compressor from over-pressurization.

9. Regulator: A regulator is a device used to control and adjust the output pressure of the compressed air. It allows users to set the desired pressure level for specific applications and ensures a consistent and safe supply of compressed air.

These are some of the fundamental terms associated with air compressors. Familiarizing yourself with these terms will aid in understanding and effectively communicating about air compressors and their functionality.

China best 50L 1.5kw Piston Compressors Oil Free Direct Driven Air Compressor lowes air compressor
editor by CX 2024-02-07

China Standard 2019 Popular 22kw 30HP Electric Direct Driven Air Compressor for Industrial arb air compressor

Product Description

2019 Popular 22Kw 30Hp Electric Direct Driven Air Compressor For Industrial

Product Description

The electric screw air compressor is equiped with 1 22kw electric motor with free air delivery of 2.7-3.7m3/min at the pressure of 7-12 bar. It is applicated for industy of Machinery , Chemical , Electric Power, Cement, Furniture, Construction Material…

This range of compressor is equiped with name brand airend(screw) ,centrifugal cooling fan and touch screen controller, with direct drive, dust proof, sound proof design.

VSD type is also available for this model , it can save energy of 30-35% , it can save more cost for enprise owner.

Technical Specifications
Airend	Working pressure	Bar	7-12
	Free air delivery	m3/min	2.7-3.7
	Compression stage		1
Electric motor	Power	KW	22
	Working voltage	V/HZ	380/50 or Customized
	Insulation		F
	Protection grade		IP54
	Energy Grade		IE2
	Starter		Direct
Whole compressor	Driven		Direct
	Separator capacity	L	7
	Lubrication capacity	L	6
	Cooling method		Air or Water
	Outlet		G1
	Dimension	mm	11008501300
	Weight	kg	590

Product Details

1. Air end of screw air compressor

The air end is with state-of-the art screw element and 4 -6 CHINAMFG bearings to make sure it plenty of air output and longer lifetime.

2.Electric Motor of the air compressor

Name brand qualified IP54 ,F insulation, IE2 , IE3 motor , high efficiency and energy saving.

3. Intake valve of the screw air compressor

High efficiency intake valve protects the compressor components by removing 99% dirty particles down to 3 microns.

4. Oil Air separator

High efficiency separating for oil and air and low oil content in the compressed air.

5. Touch Screen Controller.

6. High efficient Centrifugal fan can give best cooling for screw compressor.

7.Dust proof mesh to protect electrical control system

Ceritifications

Product Uses

After-Sales Service

WINDBELL promises to provide technical support for all screw Air Compressor manufactured. Giving guid for installation,operation and maintenance.

For periodically maintenance of silent air compressor , we suggest to use our original spare parts in order to our original specifications. Please contact us freely, if you have any demand for oil filter, air filter element, oil air separator element for jack hammer air compressor .

Company Information

Windbell Co. Ltd. was established in 2006. It is a high-tech company mainly producing Screw Air Compressor.

Located in HangZhou National High and New Technology Industries Development Zone, the company has more than 100 employees equipped with 50 advanced testing machines working in the plant area of 20000 square meter. A high profile R&D team with experience in developing products with GHH and Rotor, has more than 20 patents granted. The company can produce more than 4000 Air Compressor every year.

We believe that without an advanced quality management system you cannot make high quality products. With ISO9001 and ISO14001 certifications, the company aims to be a CHINAMFG in offering consumers efficient, energy-saving, and environment-friendly solutions in the application of air compressor. Based on its R&D output, the company has successfully applied its solutions to the field of mining, tunneling, outdoor construction and its technology also facilitates the production of medical oxygen generators and textile equipment. The Screw Air Compressor are widely sold to Southeast Asia, Central Asia, Middle East, Africa, and South America…

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Water Cooling
Power Source:	AC Power
Structure Type:	Closed Type
Installation Type:	Stationary Type
Type:	Twin-Screw Compressor

Customization:	Available \|

air compressor

What is the impact of humidity on compressed air quality?

1. Corrosion:

2. Contaminant Carryover:

3. Decreased Efficiency of Pneumatic Systems:

4. Product Contamination:

5. Increased Maintenance Requirements:

6. Adverse Effects on Instrumentation:

air compressor

How do you troubleshoot common air compressor problems?

1. No Power:

Check the power source and ensure the compressor is properly plugged in.
Inspect the circuit breaker or fuse box to ensure it hasn’t tripped or blown.
Verify that the compressor’s power switch or control panel is turned on.

2. Low Air Pressure:

Check the air pressure gauge on the compressor. If the pressure is below the desired level, the compressor might not be building up enough pressure.
Inspect for air leaks in the system. Leaks can cause a drop in pressure. Listen for hissing sounds or use a soapy water solution to identify the location of leaks.
Ensure the compressor’s intake filter is clean and not clogged, as this can restrict airflow and reduce pressure.

3. Excessive Noise or Vibration:

Inspect the compressor’s mounting and foundation to ensure it is secure and stable. Loose mounts can cause excessive noise and vibration.
Check for loose or damaged components, such as belts, pulleys, or motor mounts. Tighten or replace as necessary.
Verify that the compressor’s cooling system, such as the fan or fins, is clean and free from obstructions. Overheating can lead to increased noise and vibration.

4. Air Leaks:

Inspect all connections, valves, fittings, and hoses for leaks. Tighten or replace any loose or damaged components.
Apply a soapy water solution to suspected areas and look for bubbles. Bubbles indicate air leaks.
Consider using thread sealant or Teflon tape on threaded connections to ensure a proper seal.

5. Excessive Moisture in Compressed Air:

Check the compressor’s drain valve and ensure it is functioning properly. Open the valve to release any accumulated moisture.
Inspect and clean the compressor’s moisture separator or air dryer, if equipped.
Consider installing additional filtration or drying equipment to remove moisture from the compressed air system.

6. Motor Overheating:

Ensure the compressor’s cooling system is clean and unobstructed.
Check the motor’s air intake vents and clean any dust or debris that may be blocking airflow.
Verify that the compressor is not being operated in an excessively hot environment.
Check the motor’s lubrication levels and ensure they are within the manufacturer’s recommended range.
Consider using a thermal overload protector to prevent the motor from overheating.

air compressor

What are the different types of air compressors?

There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:

1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.

2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.

3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.

4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.

5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.

6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.

These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.

China Standard 2019 Popular 22kw 30HP Electric Direct Driven Air Compressor for Industrial arb air compressor
editor by CX 2024-02-04

China Hot selling 22kw 30HP Direct Driven Screw Air Compressor (SGD22) air compressor parts

Product Description

Model		SGD 22
Type of Cooling		Air Cooling/Water cooling
Working Pressure	psig	102	116	145	174
Working Pressure	bar	7	8	10	12
Air Delivery	cfm	134.2	127.1	113.0	95.3
Air Delivery	m3/min	3.8	3.6	3.2	2.4
Motor Power	kw/hp	22/30
Starting Mode		Y-Δ
Type of Driving		Driect driven
Dimension(mm)	L	1380
	W	850
	H	1185
Weight	KG	450
Air Outlet Pipe Diameter		1″
Voltage		380V / 3PH / 50HZ / 60HZ 220V / 3PH / 50HZ / 60HZ 440V / 3PH / 50HZ / 60HZ 415V / 3PH / 50HZ / 60HZ Can be customized
Exhaust Oil Volum		<3ppm
Noise	db	65±2
Outlet Air Humidity	ºC	ambient temperature+15ºC

Technical Data of Direct Drive Electric Motor Screw Air Compressors

Model	Working Pressure		Capacity		Motor Power	Driven Method	Cooling Method	Dimension(mm)			Net Weight	Air Outlet Pipe Diameter
	Psi	bar	Cfm	m3/min	kw/hp			L	W	H	KGS
SGD08	102	7	42.4	1.2	7.5/10	Direct Drive	Air Cooling / Water Cooling	900	670	850	200	1/2”
	116	8	38.8	1.1
	145	10	33.5	0.95
	174	12	28.3	0.8
SGD11	102	7	58.3	1.65	11/15			1080	750	1571	280	3/4”
	116	8	53	1.5
	145	10	45.9	1.3
	174	12	38.8	1.1
SGD15	102	7	88.3	2.5	15/20			1080	750	1571	300	3/4”
	116	8	81.2	2.3
	145	10	74.2	2.1
	174	12	67.1	1.9
SGD18	102	7	113	3.2	18.5/25			1380	850	1185	430	1”
	116	8	105.9	3
	145	10	95.3	2.7
	174	12	84.7	2.4
SGD22	100	7	134.2	3.8	22/30			1380	850	1185	450	1”
	116	8	127.1	3.6
	145	10	113	3.2
	174	12	95.3	2.7
SGD30	102	7	187.1	5.3	30/40			1380	850	1185	500	1”
	116	8	176.6	5
	145	10	158.9	4.5
	174	12	141.2	4
SGD37	102	7	240.1	6.8	37/50			1500	1000	1345	650	11/2″
	116	8	218.9	6.2
	145	10	197.7	5.6
	174	12	176.6	5
SGD45	102	7	261.3	7.4	45/60			1500	1000	1345	680	11/2″
	116	8	247.2	7
	145	10	218.9	6.2
	174	12	197.7	5.6
SGD55	102	7	353.1	10	55/75			1800	1250	1670	1150	2″
	116	8	339	9.6
	145	10	300.1	8.5
	174	12	268.4	7.6
SGD75	102	7	473.2	13.4	75/100			1800	1250	1670	1200	2″
	116	8	444.9	12.6
	145	10	395.5	11.2
	174	12	353.1	10
SGD90	102	7	572	16.2	90/120			1800	1250	1670	1350	2″
	116	8	529.7	15
	145	10	487.3	13.8
	174	12	434.3	12.3
SGD110	102	7	741.5	21	110/150			2300	1470	1840	1800	2 1/2”
	116	8	699.1	19.8
	145	10	614.4	17.4
	174	12	522.6	14.8
SGD132	102	7	865.1	24.5	132/175			2300	1470	1840	1850	2 1/2”
	116	8	819.2	23.2
	145	10	723.9	20.5
	174	12	614.4	17.4
SGD160	102	7	1013.4	28.7	160/200			2300	1470	1840	2000	2 1/2”
	116	8	974.6	27.6
	145	10	868.6	24.6
	174	12	759.2	21.5
SGD185	102	7	1129.9	32	185/250			3150	1980	2152	3500	DN85
	116	8	1073.4	30.4
	145	10	967.5	27.4
	174	12	875.7	24.8
SGD220	102	7	1271.2	36	220/300			3150	1980	2152	3800	DN85
	116	8	1211.1	34.3
	145	10	1066.4	30.2
	174	12	978.1	27.7
SGD250	102	7	1483	42	250/350	3150	1980	2152	4000	DN85
	116	8	1430.1	40.5
	145	10	1348.8	38.2
	174	12	1218.2	34.5
SGD315	102	7	1800.8	51	315/430	4000	1980	2152	6000	DN110
	116	8	1772.6	50.2
	145	10	1571.3	44.5
	174	12	1412.4	40
SGD355	102	7	2259.8	64	355/480	4000	1980	2152	6500	DN110
	116	8	2153.9	61
	145	10	1995	56.5
	174	12	1730.2	49

Q1: What is the rotor speed for the air end?
A1: 2980rmp.

Q2: What’s your lead time?
A2: usually, 5-7 days. (OEM orders: 15days)

Q3: Can you offer water cooled air compressor?
A3: Yes, we can (normally, air cooled type).

Q4: What’s the payment term?
A4: T/T, L/C, Western Union, etc. Also we could accept USD, RMB, and other currency.

Q5: Do you accept customized voltage?
A5: Yes. 380V/50Hz/3ph, 380V/60Hz/3ph, 220V/50Hz/3ph, 220V/60Hz/3ph, 440V/50Hz/3ph, 440V/60Hz/3ph, or as per your requests.

Q6: What is your warranty for air compressor?
A6: One year for the whole air compressor(not including the consumption spare parts) and technical supports can be provided according to your needs.

Q7: Can you accept OEM orders?
A7: Yes, OEM orders are warmly welcome.

Q8: How about your customer service and after-sales service?
A8: 24hrs on-line support, 48hrs problem solved promise.

Q9: Do you have spare parts in stock?
A9: Yes, we do.

Q10: What kind of initial lubrication oil you used in air compressor?
A10: TOTAL 46# mineral oil.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

What is the role of air compressors in power generation?

Air compressors play a significant role in power generation, supporting various operations and equipment within the industry. Here are some key roles of air compressors in power generation:

1. Combustion Air Supply:

Air compressors are used to supply compressed air for the combustion process in power generation. In fossil fuel power plants, such as coal-fired or natural gas power plants, compressed air is required to deliver a steady flow of air to the burners. The compressed air helps in the efficient combustion of fuel, enhancing the overall performance and energy output of the power plant.

2. Instrumentation and Control:

Air compressors are utilized for instrumentation and control systems in power generation facilities. Compressed air is used to operate pneumatic control valves, actuators, and other pneumatic devices that regulate the flow of steam, water, and gases within the power plant. The reliable and precise control provided by compressed air ensures efficient and safe operation of various processes and equipment.

3. Cooling and Ventilation:

In power generation, air compressors are involved in cooling and ventilation applications. Compressed air is used to drive air-operated cooling fans and blowers, providing adequate airflow for cooling critical components such as generators, transformers, and power electronics. The compressed air also assists in maintaining proper ventilation in control rooms, substations, and other enclosed spaces, helping to dissipate heat and ensure a comfortable working environment.

4. Cleaning and Maintenance:

Air compressors are employed for cleaning and maintenance tasks in power generation facilities. Compressed air is utilized to blow away dust, dirt, and debris from equipment, machinery, and electrical panels. It helps in maintaining the cleanliness and optimal performance of various components, reducing the risk of equipment failure and improving overall reliability.

5. Pneumatic Tools and Equipment:

In power generation plants, air compressors provide the necessary compressed air for operating pneumatic tools and equipment. These tools include impact wrenches, pneumatic drills, grinders, and sandblasting equipment, which are utilized for installation, maintenance, and repair tasks. The high-pressure air generated by compressors enables efficient and reliable operation of these tools, enhancing productivity and reducing manual effort.

6. Nitrogen Generation:

Sometimes, air compressors are used in power generation for nitrogen generation. Compressed air is passed through a nitrogen generator system, which separates nitrogen from other components of air, producing a high-purity nitrogen gas stream. Nitrogen is commonly used in power plant applications, such as purging systems, blanketing in transformers, and generator cooling, due to its inert properties and low moisture content.

7. Start-up and Emergency Systems:

Air compressors are an integral part of start-up and emergency systems in power generation. Compressed air is utilized to power pneumatic starters for gas turbines, providing the initial rotation needed to start the turbine. In emergency situations, compressed air is also used to actuate emergency shutdown valves, safety systems, and fire suppression equipment, ensuring the safe operation and protection of the power plant.

Overall, air compressors contribute to the efficient and reliable operation of power generation facilities, supporting combustion processes, control systems, cooling, cleaning, and various other applications critical to the power generation industry.

air compressor

How does the horsepower of an air compressor affect its capabilities?

The horsepower of an air compressor is a crucial factor that directly impacts its capabilities and performance. Here’s a closer look at how the horsepower rating affects an air compressor:

Power Output:

The horsepower rating of an air compressor indicates its power output or the rate at which it can perform work. Generally, a higher horsepower rating translates to a greater power output, allowing the air compressor to deliver more compressed air per unit of time. This increased power output enables the compressor to operate pneumatic tools and equipment that require higher air pressure or greater airflow.

Air Pressure:

The horsepower of an air compressor is directly related to the air pressure it can generate. Air compressors with higher horsepower ratings have the capacity to produce higher air pressures. This is particularly important when operating tools or machinery that require specific air pressure levels to function optimally. For example, heavy-duty pneumatic tools like jackhammers or impact wrenches may require higher air pressure to deliver the necessary force.

Air Volume:

In addition to air pressure, the horsepower of an air compressor also affects the air volume or airflow it can provide. Higher horsepower compressors can deliver greater volumes of compressed air, measured in cubic feet per minute (CFM). This increased airflow is beneficial when using pneumatic tools that require a continuous supply of compressed air, such as paint sprayers or sandblasters.

Duty Cycle:

The horsepower rating of an air compressor can also influence its duty cycle. The duty cycle refers to the amount of time an air compressor can operate continuously before it needs to rest and cool down. Higher horsepower compressors often have larger and more robust components, allowing them to handle heavier workloads and operate for longer periods without overheating. This is particularly important in demanding applications where continuous and uninterrupted operation is required.

Size and Portability:

It’s worth noting that the horsepower rating can also affect the physical size and portability of an air compressor. Higher horsepower compressors tend to be larger and heavier due to the need for more substantial motors and components to generate the increased power output. This can impact the ease of transportation and maneuverability, especially in portable or mobile applications.

When selecting an air compressor, it is essential to consider the specific requirements of your intended applications. Factors such as desired air pressure, airflow, duty cycle, and portability should be taken into account. It’s important to choose an air compressor with a horsepower rating that aligns with the demands of the tools and equipment you plan to operate, ensuring optimal performance and efficiency.

Consulting the manufacturer’s specifications and guidelines can provide valuable information on how the horsepower rating of an air compressor corresponds to its capabilities and suitability for different tasks.

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

Oil-Free Air Compressors:

1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

China Hot selling 22kw 30HP Direct Driven Screw Air Compressor (SGD22) air compressor parts
editor by CX 2024-01-31

China high quality 50L Lubricated Piston Air Compressors Portable Direct Driven Air Compressor mini air compressor

Product Description

50L Lubricated Piston Air Compressors Portable Direct Driven Air Compressor

Product Parameters

Name	Direct driven Air Compressor
Applicable Industries	Manufacturing Plant, Food & Beverage Factory, Printing Shops, Construction works , Food & Beverage Shops, Advertising Company
Showroom Location	None
Machinery Test Report	Provided
Video outgoing-inspection	Provided
Marketing Type	Other
Core Components	Pressure vessel, Engine, Motor, Pump, Bearing
Gas Type	Air
Configuration	PORTABLE
Power Source	AC POWER
Type	PISTON
Lubrication Style	Lubricated
Mute	Yes
Voltage	220V
Dimension(LWH)	723274
OEM	Welcomed

Model name

Delivery rate at 0 bar

Max. pressure

Tank

Pump

Motor input

Voltage

Speed

XLBM-50

210L/min

8 bar 115psi

50L

1048

1.8 KW

220 V

2800RPM

Product Display

Company Profile

FAQ

Q1: Are you a factory or a trading company?
A: A: Manufacturer and we focus on the development and production of air compressors for more than 20 years.

Q2: Is OEM service available?
A: Of course. We have many years experience of OEM service.

Q5: Is customized service available?
A: Of course, OEM & ODM both are available. Please contact us for details.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service:	Online Support
Warranty:	1 Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Arrangement:	Duplex Arrangement
Cylinder Position:	Vertical

Customization:	Available \|

air compressor

What are the advantages of using rotary vane compressors?

Rotary vane compressors offer several advantages that make them a popular choice for various applications. These compressors are widely used in industries where a reliable and efficient source of compressed air is required. Here are the advantages of using rotary vane compressors:

1. Compact and Lightweight:

Rotary vane compressors are typically compact and lightweight compared to other types of compressors. Their compact design makes them suitable for installations where space is limited, such as in small workshops or mobile applications. The lightweight nature of these compressors allows for easy transportation and maneuverability.

2. High Efficiency:

Rotary vane compressors are known for their high efficiency. The design of the vanes and the compression chamber allows for smooth and continuous compression, resulting in minimal energy losses. This efficiency translates into lower energy consumption and reduced operating costs over time.

3. Quiet Operation:

Rotary vane compressors operate with relatively low noise levels. The design of the compressor, including the use of vibration damping materials and sound insulation, helps to minimize noise and vibrations during operation. This makes rotary vane compressors suitable for applications where noise reduction is important, such as in indoor environments or noise-sensitive areas.

4. Oil Lubrication:

Many rotary vane compressors utilize oil lubrication, which provides several benefits. The oil lubrication helps to reduce wear and friction between the moving parts, resulting in extended compressor life and improved reliability. It also contributes to better sealing and improved efficiency by minimizing internal leakage.

5. Versatile Applications:

Rotary vane compressors are versatile and can be used in a wide range of applications. They are suitable for both industrial and commercial applications, including automotive workshops, small manufacturing facilities, dental offices, laboratories, and more. They can handle various compressed air requirements, from light-duty tasks to more demanding applications.

6. Easy Maintenance:

Maintenance of rotary vane compressors is relatively straightforward. Routine maintenance tasks typically include oil changes, filter replacements, and periodic inspection of vanes and seals. The simplicity of the design and the availability of replacement parts make maintenance and repairs easier and more cost-effective.

These advantages make rotary vane compressors an attractive choice for many applications, providing reliable and efficient compressed air solutions.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

Air compressors play a crucial role in various manufacturing and industrial processes, providing a reliable source of compressed air that powers a wide range of equipment and tools. Here are some key roles of air compressors in manufacturing and industrial settings:

1. Pneumatic Tools and Equipment:

Air compressors power a wide range of pneumatic tools and equipment used in manufacturing processes. These tools include impact wrenches, air drills, sanders, grinders, nail guns, and spray guns. Compressed air provides the necessary force and energy for these tools, enabling efficient and precise operations.

2. Automation and Control Systems:

Compressed air is used in automation and control systems within manufacturing facilities. Pneumatic actuators and valves use compressed air to control the movement of machinery and components. These systems are widely used in assembly lines, packaging operations, and material handling processes.

3. Air Blowing and Cleaning:

Compressed air is employed for blowing and cleaning applications in manufacturing and industrial processes. Air blowguns and air nozzles are used to remove debris, dust, and contaminants from surfaces, machinery, and products. Compressed air is also used for drying, cooling, and purging operations.

4. Air Separation and Gas Generation:

Air compressors are used in air separation plants to generate industrial gases such as nitrogen, oxygen, and argon. These gases are essential for various industrial processes, including metal fabrication, chemical production, and food packaging.

5. HVAC Systems:

Compressed air is utilized in heating, ventilation, and air conditioning (HVAC) systems. It powers pneumatic actuators for damper control, pneumatic controls for pressure regulation, and pneumatic valves for flow control in HVAC applications.

6. Air Compression for Storage and Transport:

Compressed air is used for storage and transport purposes in manufacturing and industrial settings. It is often used to pressurize storage tanks or containers that hold gases or liquids. Compressed air also facilitates the transfer of materials through pipelines and pneumatic conveying systems.

7. Process Instrumentation:

Compressed air is utilized in process instrumentation and control systems. It powers pneumatic instruments such as pressure gauges, flow meters, and control valves. These instruments play a critical role in monitoring and regulating various parameters in industrial processes.

8. Material Handling and Pneumatic Conveying:

In manufacturing and industrial facilities, compressed air is used for material handling and pneumatic conveying systems. It enables the movement of bulk materials such as powders, granules, and pellets through pipelines, facilitating efficient and controlled material transfer.

Overall, air compressors are vital components in manufacturing and industrial processes, providing a versatile and efficient source of power for a wide range of applications. The specific role of air compressors may vary depending on the industry, process requirements, and operational needs.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China high quality 50L Lubricated Piston Air Compressors Portable Direct Driven Air Compressor mini air compressor
editor by CX 2024-01-22

China wholesaler CHINAMFG 220V/50Hz Direct Driven 15HP 11kw Mini Screw Air Compressor arb air compressor

Product Description

Product description:
Advantage as below:
1. Energy-saving effect of permanent magnet variable frequency air compressor
2. Maintenance cost of permanent magnet variable frequency air compressor is reduced
3. The permanent magnet variable frequency air compressor reduces the capacity of the power grid of the factory
4. Permanent magnet variable frequency air compressor reduces production loss
5. Permanent magnet variable frequency air compressor can reduce noise

AIRSTONE AS-30 30HP 22KW 380V 50HZ 8Bar In Stock Screw Air Compressor
Airstone SCREW MACHINE

Airstone start from 2016 Year, for now, our monthly output is about 3000sets. and we factory area is about 100 acres.

and we have Four main machine line:

1. for 380V 50HZ screw type air compressor

2. for customized voltage screw type air compressor

3. for Integerated screw air compressor 7-13Bar

4. for laser cutting machine screw air compressor system (Include the air compressor + dryer + air tank + water separator + line filter + drain valve )

MODEL		AS-10	AS-15	AS-20	AS-25	AS-30
Power	KW	7.5	11	15	18.5	22
Capacity	m³/Min/MPa	1.2/0.7	1.7/0.7	2.4/0.7	3.1/0.7	3.6/0.7
		1.1/0.8	1.6/0.8	2.2/0.8	2.9/0.8	3.4/0.8
		0.9/1.0	1.4/1.0	2.0/1.0	2.7/1.0	3.2/1.0
		0.8/1.2	1.2/1.2	1.7/1.2	2.2/1.2	2.9/1.2
Compress Stage		Singel Stage
Ambient temperature(ºC)		-5ºC±45ºC
Cooling Method		Air Cooling/Water Cooling
Exhaust temperature(ºC)		≤Ambient Temperature + 15
Lubricant	L	12	18	18	18	18
Noise	db(A)	62±2	62±2	65±2	65±2	65±2
Drive Method		Direct	Y-Δ /Frequency Soft Start
Eletric	(V/PH/HZ)	380V/50HZ
Dimension (mm)	Length	800	1080	1080	1380	1380
	Width	700	750	750	850	850
	Height	930	1000	1000	1100	1100
Weight	(KG)	190	310	320	410	460
Outlet thread(inch/mm)		G1/2	G3/4	G3/4	G1	G1

Application

Company Information
         Hongkong CHINAMFG industry Itd-its compressor factory covers an area of more than 150 acres,located in Zone B,Xihu (West Lake) Dis.a Industrial Park,HangZhou City,ZheJiang Province which specializing in research&development and manufacturing of air compressors.The product has reached the international level and sales in Southeast Asia&North American market with good cooperation and technical strengths of German partners.
         We’re a Hi-Tech company specialize in research, development, manufacture and distribution of air compressor and spare parts. With our rich experience, profession technologyand rigorous quality control, our products are widely used in air compressor field with good feedback and continuous orders from more than 2,000 customers in domestic and oversea market.We can solve any technical problems you may encounter with your air compressor and provide many kinds of air compressor parts for you.
          The brand CHINAMFG is aim to make high efficiency screw air compressor to save the power,save the energy and save your cost;Green power make human life more harmonious and low-carbon.

YOU MAY LIKE
S ervices kits:unloading valve kits, Minimum pressure valve kit,
Stop oil valve kit, check valve kit, thermostat valve kit and more

Valve assembly:air intake valve, thermostat valve, solenoid valve, minimum pressure valve kit, blow off valve, drain valve and more

Rubber parts: hose, coupling, elbow, anti-vibration pad, housing, belt

S ensor: temperature sensor, pressure sensor, oil level sensor
Other parts: gear wheel, controller, temperature switch, pressure switch, cleaning agent

Packaging&Shipping
packing: Neutral packing & original Packing & our packing
shipping: 1-3 working days

Certification

FAQ
Q1: Are you factory or trade company?
A1:We are factory.

Q2: What the exactly address of your factory?
A2: Our head office is located in 2F Xingshun Technology Park, Chongtou community,Chang’an, HangZhou City ZheJiang Province,china.
And our factory is located in Area B,Industry Zone,Lian hua County, HangZhou City, ZheJiang Porvince, China. (That is our boss’s hometown)

Q3: Warranty terms of your machine?
A3: One year warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course. we can provide all spare parts for the machines

Q5: How long will you take to arrange production?
A5:380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 14-18days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.
CONTACT US

Hongkong CHINAMFG Industry Ltd

Office add:Room 1702 Vank center,Changan,HangZhoug,China.

Website:ienyao /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Oil Injected, Oil-less
Cooling System:	Air Cooling
Power Source:	AC Power
Cylinder Position:	Vertical
Structure Type:	Semi-Closed Type
Installation Type:	Stationary Type

Customization:	Available \|

air compressor

How are air compressors utilized in the aerospace industry?

Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:

1. Aircraft Systems:

Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.

2. Ground Support Equipment:

Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.

3. Component Testing:

Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.

4. Airborne Systems:

In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.

5. Environmental Control Systems:

Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.

6. Engine Testing:

In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.

7. Oxygen Systems:

In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.

It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

1. Pneumatic Tools and Equipment:

2. Automation and Control Systems:

3. Air Blowing and Cleaning:

4. Air Separation and Gas Generation:

5. HVAC Systems:

6. Air Compression for Storage and Transport:

7. Process Instrumentation:

8. Material Handling and Pneumatic Conveying:

air compressor

What is the role of air compressor tanks?

Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:

1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.

2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.

3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.

4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.

5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.

6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.

Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.

China wholesaler CHINAMFG 220V/50Hz Direct Driven 15HP 11kw Mini Screw Air Compressor arb air compressor
editor by CX 2024-01-17

China wholesaler 22kw Stationary Direct Driven Oilless AC Rotary Screw Air Compressor (DA-22) air compressor repair near me

Product Description

0.5-80 M3/Min 6-40 Bar 5.5-400 Kw Electrical Stationary Industrial AC Power Direct Driven/Coupled Rotary Screw Air Compressors Advantages

1.DENAIR Enhanced energy saving screw air compressor reached the super energy saving level

2.Energy Efficient Index 1(EEI 1) approved according to GB19153-2009, the energy consumption is 10%~15% lower than EEI 2.

3.CHINAMFG air compressor design with 72 types of technology patent, real bigger air flow

4.State-of-the-art screw element, original Germany CHINAMFG air end, ladvanced SAP profile design, superior Sweden CHINAMFG element bearings

5.CHINAMFG air compressdor dopts world-renowned components, such as Schneider electronics from France, DENAIR filters from Germany, Danfoss pressure sensor from Denmark, etc. contribute to guarantee the compressor longer service life.

6.Smart touch screen design and 0 pressure drop design

7.Higher efficiency cooling system and electrical motor

8.Stainless steel pipes, reasonable inner design, ensure long service life without maintenance.

Technical Parameters Of Energy Saving Rotary Screw Air Compressor

Model	Maxinmum working		Capacity(FAD)*				Installed motor power		Driving mode&	Noise	Dimensions(mm)			Weight	Air outlet
	pressure		50 HZ		60 HZ		Installed motor power		Cooling method	level**	Dimensions(mm)			Weight	pipe diameter
	bar(g)	psig	m3/min	cfm	m3/min	cfm	kw	hp		dB(A)	L	W	H	kg
DA-5	7.5	109	0.80	28	0.80	28	5.5	7.5	Belt Driven	75	900	600	860	315	G3/4″
DA-5	8.5	123	0.78	28	0.78	28	5.5	7.5	Air Cooling	75	900	600	860	315	G3/4″
DA-7	7.5	109	1.09	39	1.09	39	7.5	10		75	900	600	860	315	G3/4″
	8.5	123	1.07	38	1.07	38	7.5	10		75	900	600	860
	10.5	152	0.92	32	0.91	32	7.5	10		75	900	600	860
	13.0	189	0.73	26	0.72	26	7.5	10		75	900	600	860
DA-11	7.5	109	1.66	59	1.66	59	11	15		75	1230	650	900	324	G3/4″
	8.5	123	1.64	58	1.64	58	11	15		75	1230	650	900
	10.5	152	1.45	51	1.45	51	11	15		75	1230	650	900
	13.0	189	1.13	40	1.12	40	11	15		75	1230	650	900
DA-15	7.5	109	2.54	90	2.53	89	15	20	Direct Driven	75	1465	990	1345	453	G1-1/4″
	8.5	123	2.51	88	2.50	88	15	20	Air Cooling	75	1465	990	1345
	10.5	152	1.97	70	1.86	66	15	20		75	1465	990	1345
	13.0	189	1.91	67	1.83	65	15	20		75	1465	990	1345
DA-18	7.5	109	3.04	107	3.65	129	18.5	25		75	1465	990	1345	453	G1-1/4″
	8.5	123	3.03	107	3.63	128	18.5	25		75	1465	990	1345
	10.5	152	3.00	106	2.38	84	18.5	25		75	1465	990	1345
	13.0	189	1.91	67	2.36	83	18.5	25		75	1465	990	1345
DA-22	7.5	109	3.57	126	3.65	129	22	30		75	1465	990	1345	477	G1-1/4″
	8.5	123	3.55	125	3.63	128	22	30		75	1465	990	1345
	10.5	152	3.00	106	2.38	84	22	30		75	1465	990	1345
	13.0	189	2.97	105	2.36	83	22	30		75	1465	990	1345
DA-30	7.5	109	5.28	187	4.49	159	30	40		85	1600	1250	1550	682	G1-1/2″
	8.5	123	5.26	186	4.48	158	30	40		85	1600	1250	1550
	10.5	152	5.21	184	4.47	158	30	40		85	1600	1250	1550
	13.0	189	3.45	122	3.58	126	30	40		85	1600	1250	1550
DA-37	7.5	109	6.54	231	6.33	224	37	50		85	1600	1250	1550	728	G1-1/2″
	8.5	123	6.52	230	6.30	222	37	50		85	1600	1250	1550
	10.5	152	5.21	184	4.47	158	37	50		85	1600	1250	1550
	13.0	189	5.16	182	4.43	156	37	50		85	1600	1250	1550
DA-45	7.5	109	7.67	271	7.79	275	45	60		85	1600	1250	1550	728	G1-1/2″
	8.5	123	7.62	269	7.76	574	45	60		85	1600	1250	1550
	10.5	152	6.46	228	6.24	220	45	60		85	1600	1250	1550
	13.0	189	6.41	226	4.44	157	45	60		85	1600	1250	1550
DA-55	7.5	109	9.76	345	9.14	323	55	75		85	1876	1326	1700	1310	G2″
	8.5	123	9.67	342	9.06	320	55	75		85	1876	1326	1700
	10.5	152	7.53	266	7.74	273	55	75		85	1876	1326	1700
	13.0	189	7.40	261	6.30	222	55	75		85	1876	1326	1700
DA-75	7.5	109	14.21	502	11.72	414	75	100		85	1876	1326	1700	1325	G2″
	8.5	123	12.55	443	11.63	411	75	100		85	1876	1326	1700
	10.5	152	9.51	336	11.43	404	75	100		85	1876	1326	1700
	13.0	189	9.23	326	8.75	309	75	100		85	1876	1326	1700
DA-90(W)	7.5	109	16.62	587	17.01	601	90	120	Direct Driven	72	2450	1800	1700	2450	DN80
	8.5	123	16.37	578	16.82	594	90	120	Air Cooling Or	72	2450	1800	1700
	10.5	152	14.21	502	14.87	525	90	120	Water Cooling	72	2450	1800	1700
	13.0	189	11.77	416	11.27	398	90	120		72	2450	1800	1700
DA-110(W)	7.5	109	20.13	711	19.10	674	110	150		72	2450	1800	1700	2500	DN80
	8.5	123	20.05	708	19.06	673	110	150		72	2450	1800	1700
	10.5	152	16.33	576	17.01	601	110	150		72	2450	1800	1700
	13.0	189	14.11	498	14.68	518	110	150		72	2450	1800	1700
DA-132(W)	7.5	109	22.85	807	24.37	861	132	175		72	2450	1800	1700	2600	DN80
	8.5	123	22.73	802	24.23	856	132	175		72	2450	1800	1700
	10.5	152	19.88	702	18.95	669	132	175		72	2450	1800	1700
	13.0	189	16.51	583	16.82	594	132	175		72	2450	1800	1700
DA-160(W)	7.5	109	26.92	950	27.90	985	160	215		78	2650	1700	1850	3200	DN80
	8.5	123	26.86	949	27.76	980	160	215		78	2650	1700	1850
	10.5	152	22.44	792	23.97	846	160	215		78	2650	1700	1850
	13.0	189	19.63	693	18.82	664	160	215		78	2650	1700	1850
DA-185(W)	7.5	109	28.89	1571	30.53	1078	185	250		78	2650	1700	1850	3300	DN80
	8.5	123	28.84	1018	30.44	1075	185	250		78	2650	1700	1850
	10.5	152	25.11	886	27.46	970	185	250		78	2650	1700	1850
	13.0	189	22.08	780	23.69	836	185	250		78	2650	1700	1850
DA-200(W)	7.5	109	31.88	1126	30.53	1078	200	270		80	3000	1950	2030	4750	DN100
	8.5	123	31.82	1124	30.44	1075	200	270		80	3000	1950	2030
	10.5	152	28.48	1006	30.22	1067	200	270		80	3000	1950	2030
	13.0	189	25.00	883	27.07	956	200	270		80	3000	1950	2030
DA-220(W)	7.5	109	36.20	1278	37.22	1314	220	300		80	3000	1950	2030	4800	DN100
	8.5	123	36.15	1276	37.17	1312	220	300		80	3000	1950	2030
	10.5	152	31.71	1120	33.25	1174	220	300		80	3000	1950	2030
	13.0	189	28.48	1006	27.07	956	220	300		80	3000	1950	2030
DA-250(W)	7.5	109	43.31	1529	42.87	1514	250	350		80	3000	1950	2030	4850	DN100
	8.5	123	43.24	1527	41.30	1458	250	350		80	3000	1950	2030
	10.5	152	36.03	1272	37.04	1308	250	350		80	3000	1950	2030
	13.0	189	31.55	1114	33.15	1170	250	350		80	3000	1950	2030
DA-280(W)	7.5	109	46.59	1645	47.16	1665	280	375		85	3700	2300	2450	5200	DN125
	8.5	123	46.53	1643	45.64	1612	280	375		85	3700	2300	2450
	10.5	152	42.95	1516	42.56	1503	280	375		85	3700	2300	2450
	13.0	189	35.89	1267	36.95	1305	280	375		85	3700	2300	2450
DA-315(W)	7.5	109	53.16	1877	50.88	1797	315	425		85	3700	2300	2450	6000	DN125
	8.5	123	52.63	1858	50.83	1795	315	425		85	3700	2300	2450
	10.5	152	43.05	1520	46.27	1634	315	425		85	3700	2300	2450
	13.0	189	42.93	1516	40.32	1424	315	425		85	3700	2300	2450
DA-355(W)	7.5	109	63.37	2238	58.12	2052	355	475		85	4500	2500	2450	7000	DN125
	8.5	123	63.16	2230	56.54	1997	355	475		85	4500	2500	2450
	10.5	152	52.63	1858	51.57	1821	355	475		85	4500	2500	2450
	13.0	189	43.79	1546	45.35	1601	355	475		85	4500	2500	2450
DA-400(W)	7.5	109	70.99	2507	61.72	2179	400	550		85	4500	2500	2450	8000	DN125
	8.5	123	70.64	2494	59.72	2109	400	550		85	4500	2500	2450
	10.5	152	52.63	1858	56.52	1996	400	550		85	4500	2500	2450
	13.0	189	46.34	1636	51.35	1813	400	550		85	4500	2500	2450

*) FAD in accordance with ISO 1217 : 2009, Annex C: Absolute intake pressure 1 bar (a), cooling and air intake temperature 20 °C
**) Noise level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance: ± 3 dB(A)
***) EEI 1- Energy Effiency Index 1, which refers to enhanced energy saving series
Specifications are subject to change without notice.

DENAIR Factory & Product Lines

DENAIR Exhibition

We carefully selected for you the classic case

Enhanced Energy Saving Air Compressor in Oman

Project Name: Sandblasting in Muscat, Oman.

Product Name: 75KW 100HP Enhanced Energy Saving screw air compressor EEI 1 (Energy Efficiency Index 1) with air dryer, air receiver tank and air filters.

Model No. & Qty: DA-75+ x 1.

Working Time: From June, 2016 till now

Event: In June, 2015, 1 set of CHINAMFG enhanced energy saving air compressor system was installed in Muscat Oman. This is the first project finished by CHINAMFG distributor in Oman. Our partner Mr. Hari shared the photos at working site to us as a good starting. That means more and more CHINAMFG energy saving solutions will contribute to the industries in Oman in the near future. CHINAMFG air compressor factory and air compressor distributor will try the best to provide top quality products, cost effective solution and excellent service for local users in Oman. In order to ensure the most professional service, the distributor plans to send 2 service engineers to CHINAMFG factory in ZheJiang for training and learnin. We will update the news at that time.

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2:No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China
.
Q3: Warranty terms of your air compressor machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the air compressor?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Power Source:	AC Power

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

What is the role of air compressors in manufacturing and industrial processes?

1. Pneumatic Tools and Equipment:

2. Automation and Control Systems:

3. Air Blowing and Cleaning:

4. Air Separation and Gas Generation:

5. HVAC Systems:

6. Air Compression for Storage and Transport:

7. Process Instrumentation:

8. Material Handling and Pneumatic Conveying:

air compressor

Are there portable air compressors available for home use?

Yes, there are portable air compressors specifically designed for home use. These portable models offer convenience, versatility, and ease of use for various tasks around the house. Here are some key points about portable air compressors for home use:

1. Compact and Lightweight: Portable air compressors are typically compact and lightweight, making them easy to transport and store. They are designed with portability in mind, allowing homeowners to move them around the house or take them to different locations as needed.

2. Electric-Powered: Most portable air compressors for home use are electric-powered. They can be plugged into a standard household electrical outlet, eliminating the need for gasoline or other fuel sources. This makes them suitable for indoor use without concerns about emissions or ventilation.

3. Versatile Applications: Portable air compressors can be used for a wide range of home applications. They are commonly used for inflating tires, sports equipment, and inflatable toys. They are also handy for operating pneumatic tools such as nail guns, staplers, and paint sprayers. Additionally, portable air compressors can be used for cleaning tasks, powering airbrushes, and other light-duty tasks around the house.

4. Pressure and Capacity: Portable air compressors for home use typically have lower pressure and capacity ratings compared to larger industrial or commercial models. They are designed to meet the needs of common household tasks rather than heavy-duty applications. The pressure and capacity of these compressors are usually sufficient for most home users.

5. Oil-Free Operation: Many portable air compressors for home use feature oil-free operation. This means they do not require regular oil changes or maintenance, making them more user-friendly and hassle-free for homeowners.

6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.

7. Cost: Portable air compressors for home use are generally more affordable compared to larger, industrial-grade compressors. They offer a cost-effective solution for homeowners who require occasional or light-duty compressed air applications.

When considering a portable air compressor for home use, it’s important to assess your specific needs and tasks. Determine the required pressure, capacity, and features that align with your intended applications. Additionally, consider factors such as portability, noise level, and budget to choose a suitable model that meets your requirements.

Overall, portable air compressors provide a practical and accessible compressed air solution for homeowners, allowing them to tackle a variety of tasks efficiently and conveniently within a home setting.

China wholesaler 22kw Stationary Direct Driven Oilless AC Rotary Screw Air Compressor (DA-22) air compressor repair near me
editor by CX 2024-01-02

China high quality Hot Sale 2.5pH Direct Driven Mini Air Compressor with Great quality

Product Description

Item:Hot sale 2.5PH Direct Driven mini air compressor

FEATURES

(1)Belt-driven air compressors

(2)Powerful cast iron pump,big horse power for using

(3)Best choice for factories

(4)Metal cover for protecting the belt and wheels

(5)Various pumps can be matched with different tank capacity for choices of customers

Packaging & Delivery

Packaging Details : CARTON
Loading Port: ZheJiang
Lead Time: 25-35 days after receiving the payment.

portable compressor

Details

Iron handle for easy carrying.
Stable operation with of twin wheel and twin suction feet..

After-sales Service:	Spare Parts
Warranty:	1 Year
Lubrication Style:	Lubricated

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the advantages of using an air compressor in construction?

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

How is air pressure measured in air compressors?

China high quality Hot Sale 2.5pH Direct Driven Mini Air Compressor with Great quality
editor by CX 2023-12-09

China manufacturer 7.5kw Piston Air Compressor 100L 2.2kw Direct Driven Air Compressor 220V Belt Drive Air Compressor, Industrial Air Compressor wholesaler

Product Description

Production Introduction:
This seires air compressor widely used in pneumatuic lock, pneumatic tool, tire inflation,blowing process,spray, paint,sand bklsting and fluidic element.

1) Filling station can be used for fire brigade divers base inflatable station,

2) mine, oil field chemicals, ship, climbing, water sports center industry for human rescue,

3) fire fighting, rescue, underwater operations breathing gas filling is ideal in rescue equipment.

Detail machine pictures, all photoes are for 100% real shooting !
1, Product Show

2, Specification

AIR COMPRESSOR

Model NO.

V-0.25/8D-150L

Motor Power

2.2/3/5.5(KW/HP)

Cylinder

φ 65mmX2

Speed

980rpm/min

Tank

150L/39.6Gal

Pressure

8Bar/115 Psi

Capacity

250L/min(8.8CFM)

Weight

118KG

Dimension

1300X430X865mm

3,Detail show

4, feature:

1) Well-designed specifically for small and medium sized users;

2) The operation is simple, convenient, and less prone to failure;

3) Designed for filling the air available for breathing;

4) Guarantee inflatable gas pure health, no the oil tasteless displacement, high-pressure air filling quickly;

5) Practices can be achieved without power, and to facilitate the field work;

6) Small size, light weight, easy to move quickly;

7) Cost-effective, economical and practical.

8, Company Information
HangZhou CHINAMFG Machinery Co., Ltd is 1 of the large-scale woodworking machinery manufacturer in China. The company is located in Wangtai town.

Our company is a comprehensive enterprise which is specialized in research and development, design, manufacturing, sale and service. With advanced production equipment and professional technical staff of research and development, and management. Which is formed a unique management model and the standardization of production process.

The leading products of woodworking products are CNC router, panel saw series, sanding machine series, woodworking drill machine, Pur wrapping machine, paper sticking machine, vacuum laminating machine, edge banding machine, computer engraving machine and the other series and over 60 standards. With the scientific management, unique technology, and innovative products to meet customer demands. Our products get a very high reputation from our customers at home and abroad. Our products are sold across the country and to Russia, Ukraine, Middle-East, South Africa, Southeast Asia, Central Europe and the other countries and areas. We have earned the trust of customers and our product process is in the leading level among the same industry of domestic. It creates a famous brand called “XINLIHUI” and our products sell well both at home and abroad. It is the most trusted brand to our customers.
We would like to work a new CHINAMFG development with the insight colleagues and we welcome all the new and old friends to visit our company and crest a brilliant tomorrow together.

Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Arrangement:	Balanced Opposed Arrangement

Samples:	US$ 140/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

air compressor

What are the advantages of using an air compressor in construction?

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

air compressor

What is the impact of altitude on air compressor performance?

The altitude at which an air compressor operates can have a significant impact on its performance. Here are the key factors affected by altitude:

1. Decreased Air Density:

As altitude increases, the air density decreases. This means there is less oxygen available per unit volume of air. Since air compressors rely on the intake of atmospheric air for compression, the reduced air density at higher altitudes can lead to a decrease in compressor performance.

2. Reduced Airflow:

The decrease in air density at higher altitudes results in reduced airflow. This can affect the cooling capacity of the compressor, as lower airflow hampers the dissipation of heat generated during compression. Inadequate cooling can lead to increased operating temperatures and potential overheating of the compressor.

3. Decreased Power Output:

Lower air density at higher altitudes also affects the power output of the compressor. The reduced oxygen content in the air can result in incomplete combustion, leading to decreased power generation. As a result, the compressor may deliver lower airflow and pressure than its rated capacity.

4. Extended Compression Cycle:

At higher altitudes, the air compressor needs to work harder to compress the thinner air. This can lead to an extended compression cycle, as the compressor may require more time to reach the desired pressure levels. The longer compression cycle can affect the overall efficiency and productivity of the compressor.

5. Pressure Adjustments:

When operating an air compressor at higher altitudes, it may be necessary to adjust the pressure settings. As the ambient air pressure decreases with altitude, the compressor’s pressure gauge may need to be recalibrated to maintain the desired pressure output. Failing to make these adjustments can result in underinflated tires, improper tool performance, or other issues.

6. Compressor Design:

Some air compressors are specifically designed to handle higher altitudes. These models may incorporate features such as larger intake filters, more robust cooling systems, and adjusted compression ratios to compensate for the reduced air density and maintain optimal performance.

7. Maintenance Considerations:

Operating an air compressor at higher altitudes may require additional maintenance and monitoring. It is important to regularly check and clean the intake filters to ensure proper airflow. Monitoring the compressor’s operating temperature and making any necessary adjustments or repairs is also crucial to prevent overheating and maintain efficient performance.

When using an air compressor at higher altitudes, it is advisable to consult the manufacturer’s guidelines and recommendations specific to altitude operations. Following these guidelines and considering the impact of altitude on air compressor performance will help ensure safe and efficient operation.

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

Oil-Free Air Compressors:

China manufacturer 7.5kw Piston Air Compressor 100L 2.2kw Direct Driven Air Compressor 220V Belt Drive Air Compressor, Industrial Air Compressor wholesaler
editor by CX 2023-12-09

China wholesaler Movable Mini 1HP 2HP 1.5HP 3HP CE 9L 24L 25L 50L 200L 300L 120L 100L Oil Injected Portable Piston Direct Driven Air Compressor air compressor price

Product Description

Movable Mini 1HP 2HP 1.5HP 3HP CE Xihu (West Lake) Dis. Fini 9L 24L 25L 50L 200L 300L 120L 100L Oil Injected Portable Piston Direct Driven Air Compressor

Specification:

Mode	Motor power	Cylinder qty mm	Rotation speed r/min	FAD m3/min	Working pressure Mpa	Dimension LWH mm	Weight KGS
W-1.8/5	S1100*11KW	3*100	1200	1.8	0.5	1500x5600x4960	300
W-2.8/5	S1100-35KW	3*135	1120	2.6	0.5	16708201150	450
W-3.0/5	S1125*18.5KW	3*120	1070	3	0.5	18808701230	460
W-3.2/7	S1125*18.5KW	3*125	800	3.2	0.7	19108001620	530
W-3.5/5	S1125*18.5KW	3*125	1170	3.5	0.5	18808701240	460
SF4.0/5	S1125*18.5KW	4*120	1070	4	0.5	0	655
2V-3.5/5	S1125*18.5KW	4*115	980	3.5	0.5	18009501300	650
2V-4/5	S1125*18.5KW	4*120	980	4	0.5	18009501300	750

Main Features:

1.Heavy cast iron body: heavy load, long stroke, low fuel consumption, low noise

2.Cylinder: made of high-grade cast iron, strength, good lubricity, wall by the fine honing, wear-resistant, durable

3.Piston ring: good elasticity, excellent wear resistance, low oil consumption, not easy to make the valve group carbon deposition and loss of oil to burn the crankshaft and connecting rod.

4.The crankshaft, connecting rod, piston: well balanced, wear resistance, high strength, smooth running balance.

5.Pressure cast iron pump, can be adapted to use large horsepower;

6.Customers could choose different type of compressor pump with different size of air tank or different motor power

Factory:

Focus services:

before sales

1.24 hours online service .
2.Any inquiries will be replied within 12 hours.
3.Offer professional machine details and information.
4.Technology knowledge share .

on sale

1.Protect the client payment security .
2.Reasonable price and ensure quality .
3.Send machine pictures , videos as client need and let client know machine

more better.

after sales

1.Fast delivery and test and adjust machine working well before delivery.
2.Supply manual book and technical support in order to use well.
3.Offer install pictures step by step or videos and dispatch the engineer.
4.Guarantee time is 1 year.

After-sales Service:	Overseas Service Center with Sufficient Engineers
Warranty:	One Year
Lubrication Style:	Lubricated
Cooling System:	Air Cooling
Cylinder Arrangement:	Parallel Arrangement
Cylinder Position:	Horizontal

air compressor

How are air compressors utilized in pharmaceutical manufacturing?

Air compressors play a crucial role in pharmaceutical manufacturing, where they are utilized for various critical applications. The pharmaceutical industry requires a reliable source of clean and compressed air to ensure the safety, efficiency, and quality of its processes. Here’s an overview of how air compressors are utilized in pharmaceutical manufacturing:

1. Manufacturing Processes:

Air compressors are used in numerous manufacturing processes within the pharmaceutical industry. Compressed air is employed for tasks such as mixing and blending of ingredients, granulation, tablet compression, coating, and encapsulation of pharmaceutical products. The controlled delivery of compressed air facilitates precise and consistent manufacturing processes, ensuring the production of high-quality pharmaceuticals.

2. Instrumentation and Control Systems:

Pharmaceutical manufacturing facilities rely on compressed air for powering instrumentation and control systems. Compressed air is used to operate pneumatic valves, actuators, and control devices that regulate the flow of fluids, control temperature and pressure, and automate various processes. The clean and dry nature of compressed air makes it ideal for maintaining the integrity and accuracy of these critical control mechanisms.

3. Packaging and Filling:

Air compressors are employed in pharmaceutical packaging and filling processes. Compressed air is used to power machinery and equipment for bottle cleaning, labeling, capping, and sealing of pharmaceutical products. Compressed air provides the necessary force and precision for efficient and reliable packaging, ensuring product safety and compliance.

4. Cleanroom Environments:

Pharmaceutical manufacturing often takes place in controlled cleanroom environments to prevent contamination and maintain product quality. Air compressors are used to supply clean and filtered compressed air to these cleanrooms, ensuring a controlled and sterile environment for the production of pharmaceuticals. Compressed air is also utilized in cleanroom air showers and air curtains for personnel and material decontamination.

5. Laboratory Applications:

In pharmaceutical laboratories, air compressors are utilized for various applications. Compressed air is used in laboratory instruments, such as gas chromatographs, mass spectrometers, and other analytical equipment. It is also employed in clean air cabinets, fume hoods, and laminar flow benches, providing a controlled and clean environment for testing, analysis, and research.

6. HVAC Systems:

Air compressors are involved in heating, ventilation, and air conditioning (HVAC) systems in pharmaceutical manufacturing facilities. Compressed air powers the operation of HVAC controls, dampers, actuators, and air handling units, ensuring proper air circulation, temperature control, and environmental conditions in various manufacturing areas.

By utilizing air compressors in pharmaceutical manufacturing, the industry can maintain strict quality standards, enhance operational efficiency, and ensure the safety and efficacy of pharmaceutical products.

air compressor

How are air compressors used in refrigeration and HVAC systems?

Air compressors play a vital role in refrigeration and HVAC (Heating, Ventilation, and Air Conditioning) systems, providing the necessary compression of refrigerant gases and facilitating the heat transfer process. Here are the key ways in which air compressors are used in refrigeration and HVAC systems:

1. Refrigerant Compression:

In refrigeration systems, air compressors are used to compress the refrigerant gas, raising its pressure and temperature. This compressed gas then moves through the system, where it undergoes phase changes and heat exchange to enable cooling or heating. The compressor is the heart of the refrigeration cycle, as it pressurizes and circulates the refrigerant.

2. Refrigeration Cycle:

The compression of refrigerant gas by the air compressor is an essential step in the refrigeration cycle. After compression, the high-pressure, high-temperature gas flows to the condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve or device, which reduces its pressure and temperature. This low-pressure, low-temperature refrigerant then enters the evaporator, absorbing heat from the surrounding environment and evaporating back into a gas. The cycle continues as the gas returns to the compressor for re-compression.

3. HVAC Cooling and Heating:

In HVAC systems, air compressors are used to facilitate cooling and heating processes. The compressor compresses the refrigerant gas, which allows it to absorb heat from the indoor environment in the cooling mode. The compressed gas releases heat in the outdoor condenser unit and then circulates back to the compressor to repeat the cycle. In the heating mode, the compressor reverses the refrigeration cycle, absorbing heat from the outdoor air or ground source and transferring it indoors.

4. Air Conditioning:

Air compressors are an integral part of air conditioning systems, which are a subset of HVAC systems. Compressed refrigerant gases are used to cool and dehumidify the air in residential, commercial, and industrial buildings. The compressor pressurizes the refrigerant, initiating the cooling cycle that removes heat from the indoor air and releases it outside.

5. Compressor Types:

Refrigeration and HVAC systems utilize different types of air compressors. Reciprocating compressors, rotary screw compressors, and scroll compressors are commonly used in these applications. The selection of the compressor type depends on factors such as system size, capacity requirements, efficiency, and application-specific considerations.

6. Energy Efficiency:

Efficient operation of air compressors is crucial for refrigeration and HVAC systems. Energy-efficient compressors help minimize power consumption and reduce operating costs. Additionally, proper compressor sizing and system design contribute to the overall energy efficiency of refrigeration and HVAC systems.

By effectively compressing refrigerant gases and facilitating the heat transfer process, air compressors enable the cooling and heating functions in refrigeration and HVAC systems, ensuring comfortable indoor environments and efficient temperature control.

air compressor

How do you choose the right size of air compressor for your needs?

Choosing the right size of air compressor is essential to ensure optimal performance and efficiency for your specific needs. Here are some factors to consider when selecting the appropriate size:

China wholesaler Movable Mini 1HP 2HP 1.5HP 3HP CE 9L 24L 25L 50L 200L 300L 120L 100L Oil Injected Portable Piston Direct Driven Air Compressor air compressor price
editor by CX 2023-12-05

Product Description

What are the energy-saving technologies available for air compressors?

How are air compressors employed in the mining industry?

How do you choose the right size of air compressor for your needs?

Product Description

What is the impact of humidity on compressed air quality?

How do you troubleshoot common air compressor problems?

Can you explain the basics of air compressor terminology?

Product Description

What is the impact of humidity on compressed air quality?

How do you troubleshoot common air compressor problems?

What are the different types of air compressors?

Product Description

What is the role of air compressors in power generation?

How does the horsepower of an air compressor affect its capabilities?

How do oil-lubricated and oil-free air compressors differ?

Product Description

What are the advantages of using rotary vane compressors?

What is the role of air compressors in manufacturing and industrial processes?

How is air pressure measured in air compressors?

Product Description

AIRSTONE AS-30 30HP 22KW 380V 50HZ 8Bar In Stock Screw Air CompressorAirstone SCREW MACHINE

Hongkong CHINAMFG Industry Ltd

How are air compressors utilized in the aerospace industry?

What is the role of air compressors in manufacturing and industrial processes?

What is the role of air compressor tanks?

Product Description

What are the advantages of using an air compressor in construction?

What is the role of air compressors in manufacturing and industrial processes?

Are there portable air compressors available for home use?

Product Description

What are the advantages of using an air compressor in construction?

How do you choose the right air compressor for woodworking?

How is air pressure measured in air compressors?

Product Description

What are the advantages of using an air compressor in construction?

What is the impact of altitude on air compressor performance?

How do oil-lubricated and oil-free air compressors differ?

Product Description

Movable Mini 1HP 2HP 1.5HP 3HP CE Xihu (West Lake) Dis. Fini 9L 24L 25L 50L 200L 300L 120L 100L Oil Injected Portable Piston Direct Driven Air Compressor

Main Features:

How are air compressors utilized in pharmaceutical manufacturing?

How are air compressors used in refrigeration and HVAC systems?

How do you choose the right size of air compressor for your needs?

AIRSTONE AS-30 30HP 22KW 380V 50HZ 8Bar In Stock Screw Air Compressor
Airstone SCREW MACHINE